unit one
1.1 printed circuit assembly
1.2 assembly techniques
1.3 smt design and assembly
1.4 pcb assembly flows
unit two smc and smd
2.1 surface mount device definitions
2.2 sizes of surface mount device
2.3 smd chip resistors
2.4 smd ceramic capacitors
2.5 smd tantalum capacitors
2.6 smd melf
2.7 smd transistors
2.8 mounting of surface mount component
2.9 component size comparison
unit three printed circuit boards
3.1 the types of printed circuit board
3.2 pcb design
3.3 pcbs raw materials
3.4 drilling and plating the holes of printed circuit boards
3.5 creating the printed circuit pattern on the substrate
3.6 attaching the contact fingers
unit four adhesives
unit five types of solder paste fluxes
5.1 flux and its requirement
5.2 inorganic acid fluxes
5.3 organic acid fluxes
5.4 rosin
5.5 no-clean fluxes
unit six solder alloys and applications
6.1 introduction
6.2 availability and type of solders
unit seven surface mounted technology
7.1 component placement machines
7.2 surface mounted technology
7.3 component pick-up head types
unit eight techniques of solder interconnection
8.1 soldering iron method
8.2 hot air reflow soldering method
8.3 laser reflow soldering method
8.4 pulse heating method
8.5 ir method
8.6 vapor phase soldering vpsmethod
8.7 convection reflow methodair or n2 reflow
8.8 combined convection ir method
8.9 flowwave soldering method
8.10 the temperature profile concept
8.11 pb-free soldering process
unit nine cleaning
9.1 water-soluble fluxes
9.2 no-clean fluxes
9.3 pcb assembly cleaning
9.4 pcb cleaning test
unit ten sma inspection technique
10. 1 vision system of component placement machines
10.2 inspection process
10.3 visual inspection equipment
10.4 visual inspection items
unit eleven handling and esd control
11.1 electrostatic discharge
11.2 esd and eos
11.3 requirements of static-free work station
附录a cp-6系列富士贴片机操作简介
a1.1 machine components and operation panel
a1.2 starting and stopping the machine
附录b 专业词汇
refeences
購物車/收銀台(0) | 在線留言板
| 付款方式
| 運費計算
| 聯絡我們
| 幫助中心 |
加入書簽
HOME
新書上架
